Accessories & Efficient solutions for attaching your Speaker Cloth, covering fabric.

The right fastening makes all the difference: In this category you will find high-quality accessories for the professional installation of Speaker Cloth - ideal for home cinema projects, customised furniture and acoustically optimised interiors. Whether transparent spray adhesive, robust hand tacker, self-adhesive Hook Fastener or matching staples - interior architects, designers and craftsmen will find the right tools for clean and lasting results here.

There’s no one-size-fits-all solution for fitting speaker fabric. Each project comes with its own set of demands, whether it’s covering a self-built speaker, restoring a vintage model, wrapping an absorber, or customizing an entire studio.
To help you get the best outcome, we’ve rounded up the most effective professional methods for installing speaker fabric.


 

Stapling: Fast, Permanent, Reliable

This classic method remains a favourite – provided you’re working with a sturdy wooden or MDF frame. Ideal for speaker fronts or large wall panels in studios, home cinemas, or exhibition stands, stapling is quick, firmly anchored, and easy to handle with the right tools. You’ll need a strong stapler (electric makes it effortless), staples, scissors, and a cutter.

Place the fabric on a clean surface, centre your frame on top, and start with one long side. Wrap the fabric tightly and staple it in place, ensuring the grain runs parallel to the edge. Leave the last five centimetres at the corners loose. Then move to the opposite side, gently stretching the fabric but taking care not to overstretch. Fix the centre first as a guide, then continue evenly toward the edges. Clamps or spring clips can help maintain precision.

Repeat the same process for the short sides, then tackle the corners. Fold the shorter piece under the longer edge, keep the fabric taut, and staple at a 45-degree angle. Avoid bulky folds, they make fitting the finished panel into place difficult. Only once everything is neatly secured should you trim the excess fabric with scissors and a cutter at the corners.

Want to see how it’s done? Watch our detailed YouTube tutorial.




 

Hook Tape: Flexible, Reversible, Clever

If you’d like to remove or swap the fabric later, maybe to wash it or update its colour, hook tape (no loops attached) is your go-to solution. It might not grip as firmly as staples, but it offers flexibility and easy adjustments. Our thin hook tape is designed to lie flat and fit neatly into your speaker frame, though it’s wise to add a few staples if you’re working in damp environments.

You’ll need scissors, a cutter, and the tape. Start by placing short pieces in the four corners of the frame at 45° angles, then run strips along the long and short sides without overlapping. Trim any excess with a cutter.

Just like with staples, begin by pressing the fabric firmly onto the tape om the long sides and from the middle, using a wallpaper seam roller or your thumbnail if needed (but be gentle!). At the corners, trim the fabric at 45°, press it flat, and secure it. Finally, cut away the excess material all around.

Need visual guidance? Our YouTube channel has a step-by-step video for this method too.


 

Spray Adhesive: Strong, Permanent, Universal

When working with non-wooden frames such as metal, plastic, or sturdy vintage cardboard, spray adhesive is often your best bet. It provides a robust, permanent bond regardless of material, even though but the process demands a bit more setup. Cover your workspace, wear an FFP2 mask, and work quickly, as the adhesive’s open time is limited. You’ll need masking tape, newspaper, scissors, a cutter, and our spray adhesive.

First, mask the edges (about 3 cm inset), leaving the corners at a 45° angle on the back side of the frame. Spray outside the tape line, remove the tape and paper, then lay the frame (front side down) on the fabric. Wrap the long sides first, then the short ones, keeping the fabric even and tight. Finish with the corners, flattening the fabric so there are no overlaps. Once the adhesive is fully cured, trim the edges.

Note: In some countries we cannot ship spray adhesive. If it’s unavailable at checkout, simply remove it from your cart – you can still order the fabric. Then pop by your local hardware store for a suitable alternative.

Of course, we also offer a tutorial for this method in our YouTube channel.


 

Hot Glue: Quick Fixes with Finesse

Hot glue guns work well for smaller frames like those on Beovox CX 50 speakers. The catch? The glue sets fast, so you have to move with precision. Start in the centre of each side to minimise stretching, keep an eye on alignment, and use a quality glue gun to avoid drips. Treat the corners like you would with spray adhesive and trim only once everything has fully cooled and hardened.
 

Ultrasonic Welding: Industrial-Grade Precision

Ultrasonic welding is a high-tech industrial method for permanently bonding acoustic fabric to thermoplastic frames. It uses high-frequency vibration to melt materials under pressure – no glues involved. It’s not typically practical for DIY, but our professonal customers can rest assured that it works.

Ready to start your project? The fabric is waiting. If you have questions about which method suits your build, just reach out. And for a hands-on look at how it’s done, explore our YouTube tutorials. Happy building!