- Details
- Manufacturer information
- Acoustic measurements – Acoustic Cloth 2.0
- Features
- Downloads
- FAQ overview
Description for Speaker Cloth 2.0 DIN 4102/B2, water-repellent, 80cm wide, by the metre
Also available in 39 other colours for orders of 92 metres or more.
Width: 80 cm
This Speaker Cloth is suitable for covering speakers, soundboards, doorboards, sound absorbers, speaker frames and much more.
The flame-retardant and water-repellent covering fabric offered here is hard-wearing and can also be pulled around "hard" corners without getting a run.
Very high sound permeability is guaranteed with this covering fabric thanks to the open knitting technique. Unwanted sound losses in the mid and high frequencies are avoided or minimised.
The weave of our Speaker Cloth is "open-pored". This means that the colours of the fabric are influenced differently by the background and the angle of incidence of the light.
This covering fabric is supplied by the metre or in rolls.
Weschnitzmühle 9
69509 Mörlenbach
Germany
+49 6209 712792
shop@akustikstoff.com
Germany


There are two sound transparency measurement diagrams for every type of acoustic cloth available from Akustikstoff.com:
Diagram 1 shows the measurement in decibels (dB). It indicates how strongly sound is attenuated across different frequency ranges.
Diagram 2 shows the measurement in dBFS (decibels relative to Full Scale). This is a digital reference measurement that represents the acoustic behaviour in relation to the maximum signal level.
Each diagram contains several curves illustrating the effect of fabric tension (stretching):
- without fabric → reference measurement (open transmission)
- fabric at 0% stretch → unstretched condition
- fabric at 3% stretch → typical installation tension
- fabric at 5% stretch → maximum recommended tension



